rev1 1 rf monolithics , inc. ( 800 ) 704-6079 toll-free in u. s. and canada www.rfm.com email: support @ rfm.com third generation virtual wire development kit quick start guide general overview the third generation (3g) vwo development kits are available as: ? dr7000-dk (433.92 mhz) ? dr7001-dk (315.00 mhz) ? dr7003-dk (303.825 mhz) ? dr8000-dk (916.5 mhz) ? dr8001-dk (868.35 mhz) ? dr8100-dk (916.5 mhz w/dsss) the 3g development kits allows for complete evaluation and application development of rfm?s srr (short range radio) line of rfic?s. a communication link or range test can be executed with the data terminal to evaluate system performance. kit includes: ? 2x usb 2.0 cables ? 2x 9v batteries ? vwo configuration software ? 2x tuned, sma antennas ? 2x dr development boards ? cd with documentation key features: ? full development with silicon labs c8051f330 ide (sold separately) ? comprehensive evaluation of third generation virtual wire devices ? individual parameter configuration ? adjustable rf output power ? usb 2.0 serial communication ? example code ? third generation demo software ? 2-way communication link ? range test ? data terminal program ? diagnostic led?s ? ?out of the box? operation
rev1 2 rf monolithics , inc. ( 800 ) 704-6079 toll-free in u. s. and canada www.rfm.com email: support @ rfm.com overview the drxxxx-dk kit allows for full demonst ration or development of the thir d-generation (3g) trxxxx virtual wire device. the kit provides ?out of t he box? operation with or without the a ccompanying software. 2-way range test capability is included by simply snapping on the included 9v battery, turn on power, and configuring the opposite board for transmit. a small area is available for custom development with other popular microprocessors. the drxxxx data radio boards are conf igured to operate at a data rate of 4.8 kbps. the kits are shipped with a pair of data radio boards and matching antennas. data radi o boards with antennas can be purchased separately for development of applications. figure 1. step 1 insert usb cable into pc. step 2 insert usb cable into development boa rd. the green led will illuminate. . green led
rev1 3 rf monolithics , inc. ( 800 ) 704-6079 toll-free in u. s. and canada www.rfm.com email: support @ rfm.com step 3 move switch to the on position. the led?s will li ght in sequence and the ?heartbeat? led will flash. step 4 open the configuration software and follow the setup inst ructions. refer to the 3g vwo user guide for a description of the development kit board and the 3g configuration software user guide for detailed operation of the software tool. ? 2007 rf monolithics, inc. 3gdkqs 20080304 4441 sigma road dallas, texas 75244 (800) 704-6079 toll-free in u.s. and canada email: info@rfm.com www.rfm.com www.wirelessis.com on
|
